Table of Contents
Advertisement
PEAK IOM57 Series technical specifications (Part 2 of 2 )
Mounting
Housing
Dimensions
(Height x Width x Depth)
Weight
Compliance
The performance specifications are nominal and conform to acceptable industry standard. For application at conditions beyond
these specifications, consult the local Johnson Controls® office. Johnson Controls shall not be liable for damages resulting from
misapplication or misuse of its products.
European Single Point of Contact:
JOHNSON CONTROLS
WESTENDHOF 3
45143 ESSEN
GERMANY
Screw mount on flat surface with three integral mounting clips on controller or horizontally
mounted on single 35 mm DIN rail mount (preferred) inside a supplementary enclosure
minimum IP20 rating that only qualified personnel can access.
Enclosure material: ABS and polycarbonate UL94 5VB; self extinguishing, Plenum-Rated
Protection Class: IP20 (IEC529)
IOM5711: 146 mm x 165 mm x 56 mm (5-3/4 in. x 6-1/2 in. x 2-1/4 in.) including terminals
and mounting clips
IOM5731: 146 mm x 190 mm x 61 mm (5-3/4 in. x 7-1/2 in. x 2-3/8 in.) including terminals
and mounting clips
Note: Mounting space requires an additional 50 mm (2 in.) space on top, bottom and front
face of controller for easy cover removal, ventilation and wire terminations.
0.5 kg (1.1 lb) maximum
United States: UL Listed, File E107041, CCN PAZX, UL 916; FCC Compliant to CFR47,
Part 15, Subpart B, Class A
Canada: UL Listed, File E107041, CCN PAZX7 CAN/CSA C22.2 No.205, Signal
Equipment; Industry Canada Compliant, ICES-003
Europe: Johnson Controls declares that these products are in compliance with the
essential requirements and other relevant provisions of the EMC Directive and Low Voltage
Directive. Declared as Independently Mounted, Intended for Panel Mounting, Operating
Control Type 1.B, 4kV rated impulse voltage, 100.7°C ball pressure test.
Australia and New Zealand: RCM Mark, Australia/NZ Emissions Compliant
NA/SA Single Point of Contact:
JOHNSON CONTROLS
507 E MICHIGAN ST
MILWAUKEE WI 53202
USA
PEAK® IOM57 Input/Output Modules Installation Instructions
APAC Single Point of Contact:
JOHNSON CONTROLS
C/O CONTROLS PRODUCT MANAGEMENT
NO. 22 BLOCK D NEW DISTRICT
WUXI JIANGSU PROVINCE 214142
CHINA
20
Advertisement
Table of Contents
