............................................. It's easy to do. Follow these steps: 1. Fully discharge Omnicharge until the screen turns off. Press the Power Button and you should see an empty battery icon on the screen..............................................
PORTS AND BUTTONS ............................................. 1. Power and Menu Button 5. DC Input Port 2. AC Outlet Button/Move Up 6. USB-A Ports 3. DC Outlet Button/ Move Down 7. USB-C Input / Output Port 4. AC Outlet 8. DC Output Port .............................................
• Long Press to enter lock mode While your Omni Ultimate is powered on press and hold the AC button to enter Lock Mode. Lock mode locks the device and turns off all lights while still outputting power from the ports.
Battery's temperature is too low and the charging circuit is shut off.............................................. LOW POWER PROTECTION (ONLY DURING PASS-THROUGH) Occurs when outgoing power is higher than incoming power and battery is empty. Omnicharge will cut off the outgoing power until a sufficient battery level has been reached..............................................
Page 7
Turn on DC output and set the voltage and amperage. 2. USB Choose whether your USB-A ports are on or off when you turn on your Omnicharge. The default setting is on. 3. SCREEN OFF TIMER Set the screen auto shut-off time here. The default setting is 5 min.
Page 8
1 MIN BUTTON LIGHT 5 MIN ABOUT ˚ AUTO SHUT DOWN ˚ TEMPERATURE BUTTON LIGHT ABOUT AUTO SHUT DOWN DEFAULT ON DEFAULT OFF TEMPERATURE BUTTON LIGHT ABOUT Omni Ultimate TEMPERATURE Model: BUTTON LIGHT Cap: 142Wh ABOUT Ver: 4.2.0B/1.3.2A EXIT S/N: 2ADF070109...
Page 9
AC OUTLET Max output power: 120W US/JP 1. Quick press AC Output Button to turn the AC outlet on/off 2. The AC icon should appear on the screen 100% 0.00 W 0.00 W 120V/230V AC output 2.07 W 20.3 °C .............................................
Page 10
AUTO SHUT DOWN 12.0V = 8.0A Omnicharge keeps 4 voltage presets. You can press and hold the power button while selecting a preset to customize the voltage and amperage.............................................. DC icon will appear on the screen...
Page 11
USB-A PORTS 5V/3A, 9V/2A, 12V/1.5A QC3.0 compatible 1. Choose whether the USB output is on or off when you turn on your Omnicharge DC OUT DC OUT DEFAULT ON DEFAULT OFF SCREEN OFF SCREEN OFF AUTO SHUT DOWN AUTO SHUT DOWN .............................................
Page 13
CUSTOMER SUPPORT All Omnicharge products have gone through quality inspection. If you find your Omnicharge or any Omnicharge accessory is experiencing or demonstrating any abnormal behavior, immediately stop all product use and contact us at support@omnicharge.co....................................................FOLLOW US https://www.facebook.com/omnicharge https://www.instagram.com/omnicharge...
Need help?
Do you have a question about the Omni Ultimate and is the answer not in the manual?
Questions and answers