............................................. It's easy to do. Follow these steps: 1. Fully discharge Omnicharge until the screen turns off. Press the Power Button and you should see an empty battery icon on the screen..............................................
Page 4
EXIT Note: Only choose 150V HVDC if you are using a switch mode power supply, such as a laptop’s AC power adaptor. Check our support page at www.omnicharge.co for more detailed information.............................................. 2. Turn on AC/HVDC, the icon should appear on the screen 120V AC output 49.000 W•h...
Page 5
RAPID-CHARGING USB PORTS USB Ports: 5V/4.8A (total) 1. Choose whether the USB output is On or Off when you turn on your Omnicharge DEFAULT ON PORT SETTINGS WALL SOCKET DEFAULT OFF GENERAL SETTINGS ABOUT EXIT EXIT Single output 5V/4.8A. When both USB ports are connected, the sum of both does not exceed 4.8A.
PORTS AND BUTTONS ............................................. 1. Power and Menu Button 4. 2 USB Ports 2. USB Button 5. DC Input (5.5 x 2.1mm Barrel Port) 3. AC Outlet Button 6. AC Outlet .............................................
49.000 W•h 100% 5. Battery Remaining Capacity 34.00 W 99:99 6. Battery Level (+/- 1%) 24.3 °C 65.02 W 7. Charge Time Remaining Note: Calculated based on optimal level of power input for your device and Omnicharge’s battery level .............................................
WALL SOCKET Choose whether the AC three-prong outlet will output 120V AC or 150V HVDC.............................................. Choose whether the USB output is On or Off when you turn on your Omnicharge.............................................. SCREEN OFF Set the OLED screen auto turn-off time here. The default setting is 1 min.
Omnicharge will limit or cut off its output power.............................................. OVERHEATING PROTECTION Battery or circuit boards' temperature is too high. Omnicharge will limit or cut off its input and output power.............................................. OVERVOLTAGE PROTECTION Input voltage at the barrel port exceeds its 36V limit.
CUSTOMER SUPPORT All Omnicharge products have gone through quality inspection. If you find your Omnicharge or any Omnicharge accessory is experiencing or demonstrating any abnormal behavior, immediately stop all product use and contact us at support@omnicharge.co....................................................FOLLOW US https://www.facebook.com/omnicharge https://www.instagram.com/omnicharge...
Page 13
Omni 13 クイックスタートガイド 120V AC / 150V HVDC www.omnicharge.co...