Advertisement
IMPORTANT
Your Polaris INTERACTIVE DIGITAL DISPLAY KIT is exclusively designed for your vehicle. Please
read the installation instructions thoroughly before beginning. Installation is easier if the vehicle
is clean and free of debris. For your safety, and to ensure a satisfactory installation, perform all
installation steps correctly in the sequence shown.
NOTE: Before beginning kit installation, remove the current gauge, hood harness (PN 2412552) and
key switch from vehicle. Follow the steps in Installation Instructions to install defrost bag
(PN 2879090), hood harness (PN 2412976), GPS, key switch (PN 4012165), and display on your
Pro-Ride or Indy.
INSTALLATION INSTRUCTIONS
1. Lock the parking brake.
2. Cut a hole (A) of size 1"X1" (25.4 mm X 25.4 mm) in
defrost bag. See figure.
3. Remove side panels.
4. Disconnect hood harness (B).
P/N 9926329 Rev 01 01/15 Page 2 of 9
A
B
Advertisement
