Mercedes-Benz 190 E 2.3 Owner's Manual page 67

Replacing bulbs:
Bulb for turn signal, parking, side
marker and standing lamp (21/5W /
32/3 cp):
Turn bulb socket (11) with lamp bulb to
the left and pull out socket.
Push lamp bulb into socket and turn to
the left and pull out bulb.
Sealed Beam/Halogen headlamp:
Pull cover (4) up to release it from
bracket.
Disconnect plug (8) and disengage
clamp (7).
Take out sealed beam together with
retaining frame towards the front.
Press off frame from sealed beam.
Fog lamp bulb (H3):
Disengage clamp (6) and remove
cover (5). Disconnect plug (10), dis­
engage retaining clip and remove
bulb (9).
Tail Lamp Assemblies
1 Side marker lamp (10 W/6 cp)
2 Turn signal lamp (21 W/32 cp)
3 Stop lamp (21 W/32 cp)
4 Tail, parking and standing lamp
(10 W /6 cp)
5 Backup lamp (21 W/32 cp)
Turn both locks in the trunk to the left
as far as the stop and detach lamp
bracket. To replace the bulbs, depress,
turn to the left and remove.
License Plate Lamps
(5 W festoon lamp)
Loosen both the securing screws (1)
and take out lamp.
65