Advertisement
7
Standard operation
7.1
Receiver LED indicator
LED
8
Optional cover fixation (against vandalism)
9
Technical data
Receiver
Supply voltage
12–36 V ACDC
Transmitter memory
7
Output
2 relays 24 V, 0.5 A
Power consumption
0.5 W @ 12 V; 1.2 W @ 24 V
Standard transmitter
Battery power
2x Lithium 3 V Type CR2032
Power consumption
Transmitting: 17 mA standby: 16 µA
10
EU Declaration of Conformity
See attachment
11
WEEE
Devices with this symbol must be treated separately during disposal. This must be done in accordance with the laws of
the respective countries for environmentally sound disposal, processing and recycling of electrical and electronic equipment.
12
Contact
Bircher Reglomat AG, Wiesengasse 20, CH-8222 Beringen, www.bircher-reglomat.com
4
LED red
LED green
Safety
Input
OK
actuated
7.2
Warning indicator for low battery voltage
Receiver: 3 beeps every minute
3x
Beep
Battery voltage
low
To find out which transmitter has low
battery voltage:
Press each edge. A beep indicates the low
OK?
battery.
To avoid the cover removal without
tools:
Use screw to attach the cover.
Drill a hole (Ø 3.5 mm) at the marked
position
Close the cover
Tighten the screw (3.5 mm x 8 mm
self-tapping,T15) enclosed
System
Frequency bands
869.525 MHz & 868.15 MHz
Range
Under optimum conditions up to 100 m
Protection class
IP65
IEC 60529
Working temperature
–20 °C to +55 °C
| Swissdoor ApS, Stenhuggervej 2, 5471 Søndersø, www.swissdoor.dk
Advertisement
