Table of Contents

Advertisement

User manual version V2.3
Picture1-3
Unscrew the two-holed water-proofing connector from the interface panel. as shown in
Picture1-2 1-3.

2. Install

Pick out the net cable and the water-proofing connector from the package and follow the
Picture2-1 A , put the net cable in from the gap, as shown in Picture2-1 B, then put the net
cable one after another into the kneck of the interface panel. as shown in Picture2-1 C.
Picture 2-1
5

Advertisement

Table of Contents
loading

Table of Contents