en
Fault
Appliance does not ope-
rate.
Appliance works only for
a short time.
Cooling is insufficient
24
Troubleshooting
Possible causes
Plug is not plugged.
Appliance is not switched on.
No electricity at wall socket.
Timer is on.
Power cord is damaged.
The device has been turned
off is less than 3 minutes.
The temperature is below the
set temperature.
Exhaust hose is kinked or
clogged.
Air filter are clogged.
Float switches off the applian-
ce.
Windows or doors open
There is heat source in the
room (radiator or similar).
Temperature settings to high
Air filters are clogged.
Solution
Insert the plug.
Switch on appliance.
Use other wall socket.
Timer switch off.
Call service hotline.
Wait 3 minutes.
Change temperature settings.
Eliminate kink or blockage
Clean filters.
Drain the condensation.
Close windows and doors.
Switch of the heat source.
Set lower temperatur
Clean filters