Advertisement
INSTRUCTIONS
PARTS LIST
P/N 38015-TX6-A00
Remote (1) P/N 72147-TX6-C61
Remote (1) P/N 72147-TX6-C71
Bidirectional Antenna
GPS Antenna
Transceiver
© 2018 American Honda Motor Co., Inc. – All Rights Reserved.
Accessory
REMOTE ENGINE START KIT
P/N 38015-TX6-A00
BII09092-23 (1809)
Application
2019 ILX
(Technology Package)
Antenna Bracket
Screw
6 mm Flange Nut (3)
Publications No.
VERSION 1
Issue Date
SEP 2018
1 of 7
38015-TX6-A000
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Acura 38015-TX6-A00
Summary of Contents for Acura 38015-TX6-A00
- Page 1 Accessory Application Publications No. INSTALLATION VERSION 1 REMOTE ENGINE START KIT 2019 ILX Issue Date INSTRUCTIONS P/N 38015-TX6-A00 (Technology Package) SEP 2018 PARTS LIST Antenna Bracket Remote Engine Start Kit P/N 38015-TX6-A00 Remote (1) P/N 72147-TX6-C61 Remote (1) P/N 72147-TX6-C71...
- Page 2 Isopropyl alcohol Shop towel Blanket The following tools are available through the Acura Tool and Equipment Program. On the iN, click on Service > Service Bay > Tool and Equipment Program, then enter the number under “Search.” Or, call 888-424-6857.
- Page 3 Remove the driver's dashboard lower cover. Pull out the audio unit assembly. Disconnect the NOTE: To avoid whitening the dashboard cover, hazard warning switch connector and the audio unit start by gently and evenly pulling out on the lower connectors. edge of the cover to release its lower clips, then work NOTE: There is a lever lock on one of the audio unit your way up the cover to release the middle and top...
- Page 4 Lower the tilt lever. Pull and lower the steering 10. Reconnect the negative battery cable. Then press wheel. the Engine Start/Stop button to select the ON mode. Turn the steering wheel 90° counterclockwise. Using a plastic trim tool, release the retaining tab. STEERING WHEEL 2 CLIPS...
- Page 5 13. Remove the dashboard meter visor and disconnect 16. Locate the vehicle connector taped to the vehicle the VSA OFF switch connector. harness. Remove the tape to free the 3-pin connector and route the connector to the right of the dashboard support bracket.
- Page 6 19. Plug the bidirectional antenna into the transceiver 22. Attach the GPS antenna supplied in this kit to the and secure the clip on the harness to the bracket. bracket assembly using one flange nut. GPS ANTENNA GPS ANTENNA HARNESS CLIP PLUG 20.
- Page 7 ENGINE REMOTE START SYSTEM REGISTRATION NOTE: the PCM code will be required for this procedure. Connect the HDS to the data link connector. Launch the HDS and select Immobilizer Setup Tool. From the Registration Menu, select KEYLESS ACCESS Remotes, then select 2-WAY KEYLESS SETUP.
Need help?
Do you have a question about the 38015-TX6-A00 and is the answer not in the manual?
Questions and answers