Table of Contents
Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for InWin 309
Summary of Contents for InWin 309
- Page 1 User Manual...
- Page 2 Product Story Inspired by the beauty of stained glass, the 309 is for RGB enthusiasts that crave their PCs to be a light show, a club or festive enough for the holidays. Create your own designs with 144 addressable RGB LEDs! For the love of RGB, can we get anymore LEDs?! Yes actually, by including our EGO fans with 16 MORE LEDs per fan.
-
Page 3: Specifications
▪ 3 x 120mm Top Fan / 360mm Radiator Thermal ▪ 3 x 120mm Bottom Fan / 360mm Radiator (Slim) Solution Compatibility (4 InWin EGO Fans Pre-Installed: 3 on Top; 1 at Rear) Power Supply PSII: ATX12V Compatibility - Length up to 200mm... - Page 4 Specifications (InWin EGO Fans) Model EGO AE120 Fan Size 120 x 120 x 25mm Materials Silicone, PC Rated Voltage DC 12V Rated Power 0.76W Rated Current 0.06A ADD RGB Rated Voltage ADD RGB Rated Power ADD RGB Rated Current 0.8A...
-
Page 5: Package Contents
Package Contents 309 Chassis Mag-Ear Headphone Hanger (Random Color) Accessories Bag QR Code Card... -
Page 6: Accessories Bag
Accessories Bag Motherboard Motherboard Stand-offs Stand-off Socket Hexagon Head 2.5" HDD Screws Screws 3.5" HDD Screws Cable Ties Water-cooling Graphics Card Holder System Washers M3 Thread Water-Cooling #6-32 Thread Water-Cooling Radiator Screws Radiator Screws (EGO Exclusive) (EGO Exclusive) - Page 7 Case Structure Power Button HDD LED Indicator USB 3.0 Ports USB 3.1 Gen 2 Type-C Port Audio Ports (Earphone and Microphone) Reset Button LED & Fan Mode Button LED & Fan Control Buttons...
- Page 8 Power Supply Mounting Area 3.5" Drive Bay 2.5" Drive Bay Top Fan / Radiator Mounting Area (3 InWin EGO Fans Pre-Installed) Rear Fan / Radiator Mounting Area (1 InWin EGO Fan Pre-Installed) Bottom Fan / Radiator Mounting Area Motherboard Mounting Area...
-
Page 9: Opening The Chassis
Installation Guide ▪ Please follow the related chapters to assemble. ▪ Please use original provided accessories to avoid damage to the product. Opening the Chassis Please remove by pressing the handle on top of panel. Clock Synchronization Please pull the plastic mylar tab to activate the clock synchronization, Pull then run the GLOW2 software to... -
Page 10: Motherboard Installation
Motherboard Installation Parts Required: Motherboard Stand-Offs, Motherboard Stand-Off Socket, Hexagon Head Screws Expansion Card Installation Parts Required: Hexagon Head Screws, Graphics Card Holder... - Page 11 I/O Wires Installation POWER SW H.D.D LED POWER LED RESET SW (Depend On Motherboard) HD Audio Header PORT2_L BLUE BROWN SENSE2_R SENSE_SEND PURPLE PORT2_R YELLOW WHITE SNAS1_R PORT1_R ORANGE PRESENCE# PORT1_L GREEN BLACK USB3.0 Header PIN#1 PIN#19 Vbus IntA_P1_SSRX- Vbus IntA_P2_SSRX+ IntA_P2_SSRX- IntA_P2_SSRX+...
- Page 12 The Instructions of Type-C Cable If your motherboard supports Type-C, please connect the Type-C connector with the header directly on the motherboard.
- Page 13 USB Cable Please plug in USB port on motherboard. LED Power Ensure the beveled edge of the PSU connector is properly aligned with the beveled edge of the LED light connector. PSU Connector LED Light Connector Black GND Black 12V Yellow Controller Power Make sure the PSU connector is properly aligned with the controller connector from edge to edge.
-
Page 14: Drive Bays
4-pin connector into the fan header directly on the motherboard. Note: The fans will be controlled by the motherboard when the connector is installed properly. If you would like to control the EGO fans via InWin’s exclusive GLOW2 software, please DO NOT install the fan connector with your motherboard. -
Page 15: Completing Installation
Fan / Liquid Cooling Radiator Installation Parts Required: Water-cooling System Washers, M3 / #6-32 Thread Water-Cooling Radiator Screws (EGO Exclusive) Completing Installation Parts Required: Cable Ties... - Page 16 LED & Fan Control Buttons Instructions The LEDs and fans can be controlled by pressing the control buttons on the I/O panel or controlled by GLOW2 software. Control Buttons Descriptions Control Mode button For more detailed instructions, please watch the video at this website link Control Buttons Instructions Please follow the button sequence below to adjust LED...
- Page 17 Creation Mode, which grants users access to design their own front panel to match their preferred theme. The only limitation is your own imagination! 1. Please click “download” on 309 website to install the GLOW2 software. (https://www.in-win.com/en/gaming-chassis/309) 2. After downloading the GLOW2 on the desktop, please click to open it.
- Page 18 GLOW2 software lighting by downloading the GLOW2 software. * Note: The 309 and EGO fans use a lot of LEDs and some motherboards may not be able to handle the number of LEDs. Please use the GLOW2 software if the lighting isn’t functioning properly.
- Page 19 MIC Threshold Settings Please set the numbers in ascending order. The smaller the number, the greater the sensitivity. Hourglass Time Setting Please setting from 1 to 60 minutes. * Note: Please click “Save to ROM” and “Apply” buttons to apply all the changes.
- Page 20 Mode Descriptions Night Light Candle Create an atmosphere Lighting effect by voice catching in dark room from microphone Music Cloud floating in sky Equalizer mode’s lights reveal the rhythm of music Vortex Twinkling Rotating vortex Like stars twinkling in night sky Time Tunnel E.C.G Dazzling tunnel effect...
- Page 21 Creation Mode Creation Edit Customize own lighting effect Tool Brush / Eraser / File Painting / Trash Can / Save Palette Please double-click the block to add/change the colors. SlideShow Provide 4 plates to create image, which offer 60 second maximum to setting slideshow time on front panel.
- Page 22 Notices and Warranty ■ Notices 1. Please follow the user manual for installation. 2. To avoid damaging any circuits, please make sure the power is off before assembling any internal device. 3. When installing the computer components, please use the antistatic precautions to prevent ESD (electrostatic discharge) damage.
- Page 23 ■ Warranty 1. For more detailed warranty information, please visit the InWin retail website at www.in-win.com. 2. The actual product is subject to change without prior notice. InWin Development Inc. reserves the right to make any final modifications.
- Page 24 Copyright © 2019 In Win Development Inc. All Rights Reserved.
Need help?
Do you have a question about the 309 and is the answer not in the manual?
Questions and answers