Schindler 3100 Owner's Manual page 166

Schindler 3100/3300/6300
Copyright © 2017 INVENTIO AG
Code
CAR ALARM DEVICE OFF HOOK
8009
The alarm device is on the line for an alarm call.
CAR ALARM DEVICE ON HOOK
8010
The alarm device is no longer on the line for an alarm call.
CAR ALARM TEST ENABLED
A valid COP alarm button sequence has been executed or the appropriate
8011
menu (134) has been activated. The elevator informed telealarm device that
next alarm would be a test alarm.
CAR ALARM TEST STARTED
8012
An alarm button pressed has been detected and is a test one.
CAR ALARM TEST END
8013
An alarm button pressed has been detected and was a test one.
CAR ALARM TEST DISABLED
This message means that no test alarm has been performed on the COP
8014
keyboard. This event is coming after a predefined time window (usually 30s)
where the maintenance person can perform a test alarm.
MAIN SWITCH OFF
8017
Main switches has been switched off (JH).
MAINS POWER FAILURE
8018
Phase of power line is lost for at least 1200 ms- Power phase has rotated for at
least 1200 ms.
CAR EMERGENCY LIGHT DEFECT
8019
Emergency car light is broken.
CAR EMERGENCY LIGHT OK
8020
Emergency car light is available
CAR ROOF TEMPERATURE OK
8021
Car roof temperature is in range. See range thresholds CF22PA27 and
CF22PA28
CAR ROOF TEMPERATURE OUT OF RANGE
8022
Car roof temperature is not in range. See range thresholds CF22PA27 and
CF22PA28
CAR ALARM BUTTON DEFECT
8023
Alarm button on COP is defect.
CAR ALARM BUTTON OK
8024
Alarm button on COP is OK.
ELECTRICAL INDICATOR COP FAIL
8025
Electrical indicator on COP are defect.
SELF TEST TRIP PERFORMED
8028
Self test trip has been triggered. See parameters CF22PA7 and CF22PA8.
ECU TEMPERATURE OK
8030
Temperature in the ECU is normal.
ECU TEMPERATURE OUT OF RANGE
8031
Temperature in the ECU is out of range.
MAIN SWITCH ON
8032
Main switches (JH) has been switched on.
Car Alarm Message
J 43402603 / 01 166/269