Summary of Contents for BATHCO LAUNDRY
-
Page 1: Table Of Contents
Laundry Installation Instructions Contents Getting started Required tools & materials Laundry cabinet installation Laundry top installation Hinge adjustment Soft close drawers Trouble shooting Plumbing recommendations Cleaning & maintenance Bath Co Warranty... -
Page 2: Getting Started
Silicone Sealant Cleaning materials Laundry Cabinet Installation PLEASE READ CAREFULLY – It is recommended that a qualified, licensed trades person installs your unit. Ensure instructions are passed to homeowner. 01. Prior to installation it is important to inspect the unit to ensure no damage has occurred in transit. -
Page 3: Laundry Top Installation
03. Laundry end panels are available as a separate item. These are supplied with 2x system 32 brackets (refer to image 06). Must be securely fastened. 04. Laundry wall packers (code: LPP) are also available if unit is installed off the wall, or if there is a small gap between the wall and the unit. -
Page 4: Soft Close Drawers
Soft Close Drawers When a cabinet has soft close drawers, the drawers will need to be removed prior to installation of the cabinet. Please view the following instructions on how to remove the drawers. Removal When you pull the drawer out you will notice a grey label on each side of the drawer (as per below diagram). When the label on each side is removed –... -
Page 5: Trouble Shooting
Please contact Bath Co Customer Services for a replacement. This is not covered under warranty. What are the dimensions of the cabinets – internal and external? All dimensions can be found on our website – www.bathco.co.nz or in our brochures. How to cut out a sink hole in... -
Page 6: Bath Co Warranty
BATHCO.CO.NZ CHRISTCHURCH AUCKLAND info@smail.co.nz 86 Wigram Road, Wigram...