Page 1
Vigilant Inc. Guardian10 & Guardian100 Humidification Systems Operating Instructions...
Page 2
2% of your desired setting. Should you have any questions regarding the installation or operation of Vigilant’s Guardian Humidification System, please call us toll-free at 888-812-4427. We will be happy to assist you.
Page 3
Typical Install Location of System Installation 1. Remove all packing material from the Reservoir area and make sure the parts list is complete. 2. Place the Guardian Humidification System in the bottom of your cabinet. 3. Insert the small end of the power cord through a hole in your cabinet and plug it directly into the power jack on the front of the Control Module of your System.
Page 4
7. Slowly fill the water Reservoir with distilled water until the time-to-fill LED turns off. Next, carefully fill your Reservoir to approximately 1" below the overflow hole. The Reservoir is outfitted with an overflow vent that will dispense water into your cabinet rather than into the electronics compartment. IMPORTANT: ...
Page 5
Inserting your hand into grommet hole, remove the wicking filter. 4. Wipe the walls of the Reservoir with a damp paper towel. 5. Wicks should be changed every 90-120 days and can be ordered directly from Vigilant, online at http://shop.vigilantinc.com/ or by using the enclosed Order Form.
Page 6
Suggestions The installation and maintenance of your Guardian Humidification System will directly affect its Performance. Here are some factors to consider: • Do not block the airflow of the humidifier fan. Shelves or boxes of cigars should be at least 4” above the fan.
Page 7
All Vigilant electronic products are guaranteed to be free from defects in materials and/or workmanship for up to two years from date of purchase. Vigilant, at its sole discretion, may repair or replace defective components or products within this two-year period.
Need help?
Do you have a question about the Guardian10 and is the answer not in the manual?
Questions and answers