Advertisement
and ring, and carefully empty out the ingredients into a bowl etc.
Do not operate the grinder continuously for more than 30 seconds. Always allow the appliance to cool down to
room temperature before continuing.
WARNING: AFTER USE ALWAYS ENSURE THE DIAL IS RETURNED TO "0" (OFF POSITION) AND THE
APPLIANCE IS UNPLUGGED
CLEANING AND MAINTENANCE
GRINDER ATTACHMENT
1. In addition to the following you must refer to the safety precautions.
2. Turn grinder upside down and carefully unscrew the blade housing. Carefully remove the blade housing.
Clean with hot water and a little mild cleaning agent taking great care as the blades are very sharp.
3. Ensure the bowl and blades are clean, rinse and dry well before re-using.
4. Never use aggressive cleaning agents.
WARNING: DO NOT TOUCH THE SHARP BLADES, WHEN CLEANING PLEASE WIPE WITH A CLOTH TO AVOID
ACCIDENTAL INJURY.
CLEANING AND STORAGE
BLENDER AND JUG
1. In addition to the following you must refer to the safety precautions.
2. Do not clean motor main body, power cord and plug with water.
3. Clean the main body with a soft, damp cloth and some mild cleaning agent.
4. Fill the jug half-full with warm water and a little cleaning agent. Let the unit run on speed 2 until the jug is
clean.
5. Ensure the jug and blades are clean, rinse and dry well before re-using.
WARNING: THE BLADES INSIDE OF THE JUG ARE VERY SHARP .
6. Never use aggressive cleaning agents.
REMOVABLE BLADES
The blades of your Wahl James Martin Table blender are removable and can be removed for cleaning. Please
ensure that you read the following instructions carefully.
1. Ensure the appliance is turned off and unplugged.
2. Remove the jug assembly from the base, turn the jug upside down and following the instructions on the
blade housing turn clockwise to remove the blades and to replace turn anti-clockwise.
3. Carefully remove the blade housing and wash with mild cleaning agent taking great care as the blades are
sharp.
4. Dry all parts carefully.
TO REASSEMBLE
1. Carefully screw the blade housing onto the glass jug ensuring that it is securely tightened.
IMPORTANT: Always unplug the main housing and remove the complete jug assembly before attempting to
unscrew the blade housing.
IMPORTANT: Never place or store the blade housing on the main unit whilst removed from the jug.
Advertisement
