Cleaning And Maintenance - Wahl James Martin ZX879 Manual

James Martin Easy Store Table Blender
NOTE: If blending warm liquids remove the measuring cup and cover with a
folded tea towel to avoid any spillage, start blending at a low speed,
increasing to high speed if required. The pulse setting is not recommended
for warm liquids. Do not blend warm liquids over the 1L level, and always take
care to avoid contact with any steam or liquids.

CLEANING AND MAINTENANCE

Before cleaning always unplug the appliance
1. The motor unit must not be immersed in water or any other liquid.
2. Wipe the motor unit with a slightly damp cloth if necessary.
NON-ELECTRICAL PARTS
1. Fill the jug half-full with warm water and a little washing up liquid and run
the unit on speed 2 until the jug is clean or wash the non-electrical parts in
warm water with a little washing up liquid.
2. After cleaning, you can use the plastic jug to cover the body in order to
save space.
WARNING: THE BLADE IS SHARP. ALWAYS TAKE GREAT CARE. DRY
AND STORE SAFELY AWAY IMMEDIATELY AFTER CLEANING.
3. Dry completely before re-assembly.
NOTE: Due to processing of harder foods the blender jar may dull slightly over
a period of time. This is normal and does not effect it use.
IMPORTANT: Always clean the removable parts immediately after use, dry
and store away.
If any problem has been encountered during use, never disassemble the
Motor Unit by yourself, there are no user serviceable parts inside. Contact an
authorised service facility for examination and repair.
7