Second Row Center Lap/Shoulder Belt Operating Instructions - Jeep Patriot 2011 Operating Information Manual

Second Row Center Lap/Shoulder
Belt Operating Instructions
The second row center lap/shoulder belt fea-
tures a three-point seat belt with a mini-latch
and buckle, which allows the shoulder belt to
detach from the lower anchor when the seat is
folded. The mini-buckle and shoulder belt can
then be stored out of the way in the right side
trim panel for added convenience.
1. Remove the mini-latch and regular latch
from its stowed position in the right rear side
trim panel.
Mini-Latch Stowage
2. Grasp the mini-latch plate and pull the belt
over the seat.
3. Route the shoulder belt to the inside of the
right head restraint.
Routing The Rear Center Shoulder Belt
4. When the belt is long enough to fit, insert the
mini-latch plate into the mini-buckle until you
hear a "click."
5. Sit back in seat. Slide the regular latch plate
up the webbing as far as necessary to allow the
belt to go around your lap.
6. When the belt is long enough to fit, insert the
latch plate into the buckle until you hear a
"click."
Connecting Mini-Latch To Buckle
29