Settings; Settings Mode; Recording Settings - Philips VoiceTracer DVT2110 User Manual

Scene
Note
Format
MP3 • 128 kbps

6 Settings

Mic sensitivity
High
Limiter

Settings mode

On
In the settings mode, you can change and adjust various Mic zoom
settings according to your own preferences.
360°
Noise cut
On
Wind filter
Off
1 2
Folder

Recording settings

1
A
Playback settings Voice activation
2
Off
Device settings
3
Edit mode
Always ask
Start the settings mode
Pre-recording
10 sec
1
In stop mode, press the Right function button
open the settings panel.
Timer
25 June 2018 • 20:15
Scene
2
Press the Record button to select All settings.
Note
Auto divide
10 mins Format
Navigate between settings
MP3 • 128 kbps
Auto bookmark
10 mins Mic sensitivity
• Use the Up/Down buttons.
High
External input
Select a setting
Line-in
Limiter
On
• Press the Record button.
Mic zoom
360°
Recording settings
Noise cut
On
Wind filter
Scene
Off
Folder
Select a scene according to specific recording situations,
A
e.g. a lecture or an interview. Every scene has pre-
defined settings, such as the format or the microphone
Voice activation
sensitivity, that cannot be changed. If you would like
Off
to change the settings of a scene, you need to select
the scene Custom where you can define each setting
Edit mode
according to your own preferences.
Always ask
Pre-recording
10 sec
Timer
25 June 2018 • 20:15
Auto divide
10 mins
12 Settings
Auto bookmark
10 mins
3
to
14:31
Format
Select the format of your recording according to specific
recording situations.
Mic sensitivity
Adjust the microphone sensitivity of your VoiceTracer.
Select the sensitivity according to the background
noise, number of recorded sound sources and distance
between sound source and microphones.
Limiter
Activate this function to prevent recordings from being
oversteered by sound input over the maximum sound
level. If the recording suddenly exceeds the maximum
sound level, the microphone sensitivity is automatically
reduced.
Noise cut
Turn the Noise cut feature on in order to reduce
background noise while recording. This way, especially
audio recordings sound clearer.
Wind filter
Activate the wind filter to reduce wind noise when you
are recording in a very windy environment.
Folder
Select the folder you want your recording to be saved in.
Voice activation
Use voice activation to start recording when you begin
speaking. When you stop speaking, the device will
automatically pause recording after three seconds of
silence. It will resume only when you begin speaking
again.
Edit mode
Select what should happen when you edit a recording.
Pre-recording
When the pre-recording function is enabled, the device
will start recording some seconds prior to the event.
Timer
Use the timer function to automatically start recording on
a preset date and at a preset time. You can also select
when the recording should stop.