Vpn - AKCP SEC+ Product Manual

SEC+ and L-DCIM Product Manual

VPN

You can configure the built-in VPN server here. Its configuration is identical to that of the Windows
APS versions.
This feature is used to connect your SEC5E and SP+ units remotely with the SEC+ VPN server.
After the SEC+ VPN server is set up, you'll need to fill out the same options on both ends to be able
to use the VPN connection (see below).
Note: This feature requires a separate license on SP+ units. When you use the VPN option on the
SP+ units, the maximum number of sensors that can be used by the unit will be reduced to 50 (this
doesn't apply to SEC+ itself).
- 59 -