AKCP SEC+ Product Manual page 53

SEC+ and L-DCIM Product Manual
In most cases you need keep the interface in DHCP mode, but if necessary, you can enter a fixed IP.
The default gateway could be modified to use the Wi-Fi interface if you plan to use this interface as
the primary to access the unit.
After you've successfully connected to an access point, the assigned DHCP IP address and gateway
will be displayed here.
Important:
Since all licenses are tied to the unit's MAC ID, it's important to choose the interface which you'll be
using to access the unit. If you use another interface than what you used before, your licenses won't
work and the unit goes back to the default license.
Provided by https://www.didactum-security.com/en/
- 53 -