Display On/Auto - Softube Console 1 Fader User Manual

21
CONSOLE 1 FADER USER'S GUIDE |
Page
Don't let the physical ten fader-limitation of Console
1 Fader fool you! As with most digital mixing devices,
there are a lot more channels available than meet the
eye.
By pressing the Page + and Page – buttons, you can
scroll through your mixing channels ten channels at a
time. So when looking at channels 1–10, pressing + will
take you to channels 11–20, and so on. Pressing – takes
you back again.
If you are using both Console 1 and Console 1 Fader,
the OSD can show 20 channels at once. The thin blue
line at the bottom of the OSD informs you, which 10
channels are currently active on the Console 1 Fader
console.

Display On/Auto

After Console 1 Fader has been instantiated on a track,
press Display On to see the big On-Screen Display
(OSD). This is where the action is! Press Display On
again to make the OSD disappear.
Hold down Shift (on Console 1 Fader, not your com-
puter keyboard) and press the Display On/Auto button.
You have now activated Auto mode. This is a conveni-
ent function that makes the OSD pop up whenever you
touch any the Console 1 Fader controls. After a few
seconds of inactivity, the OSD disappears.
You can turn Auto mode off by pressing Shift + Display
On/Auto again.
The time the OSD stays up after inactivity can be set in
the Settings menu.