The Faders; The Track Selector Buttons - Softube Console 1 Fader User Manual

The faders

The faders are the main tools on Console 1 Fader.
You can use them exactly as any other mixer, and their
graphical positions represent the actual volume settings
of the tracks.
They are also motorized, so when you use automation
to add dynamic changes to your mix, the faders move
accordingly.
The default state of the faders is to adjust volume of
individual tracks. This is confirmed by the yellow LED
next to the Volume label (on the right hand side).

The Track Selector buttons

There are ten unlabeled buttons at the lower part of
Console 1 Fader, one for each channel. They are Track
Selectors, and their primary function is to select what
mixer channel to work on. Notice how the LED next
to these buttons change from yellow to white, when a
channel is selected.
When you are in Layer Mode, these buttons are used to
select layer.
CONSOLE 1 FADER USER'S GUIDE |
Yellow: Purple:
Track mode Character mode
White: Green:
Selected track Send, Input Gain, Low
Cut, and High Cut mode
Red:
Blue:
Drive mode
Layer mode
19