Environmental Notices; Electromagnetic Compatibility Notices - IBM DS8900F Introduction And Planning Manual

The over-current protection for the output AC circuit has to be provided by users. The UPS has
an electronic protection of AC output short circuit.
Servicing of batteries should be performed or supervised by personnel who are knowledgeable
about batteries and the required precautions. Keep unauthorized personnel away from
batteries.
When replacing batteries, replace with the same number and type of battery.
CAUTION! Do not dispose of battery or batteries in a fire. The batteries may explode.
CAUTION! Do not open or mutilate the battery or batteries. The released electrolyte is harmful
to the skin and eyes. It may be toxic.
CAUTION! A battery can present a risk of electrical shock and high short circuit current. The
following precautions should be observed when working on batteries.
-Remove watches, rings, or other metal objects.
- Use tools with insulated handles.
- Wear rubber gloves and boots.
- Do not lay tools or metal parts on the top of batteries.
- Disconnect charging source prior to connecting or disconnecting battery terminals.
- Determine if the battery is inadvertently grounded. If inadvertently grounded, remove source
of ground. Contact with any part of a grounded battery can result in electrical shock. The
likelihood of such shock will be reduced if such grounds are moved during installation and
maintenance (applicable to UPS and a remote battery supply not having a grounded supply
circuit).

Environmental notices

This information contains all the required environmental notices for IBM Systems products in English and
other languages.
The IBM Systems Environmental Notices (ftp://public.dhe.ibm.com/systems/support/warranty/
envnotices/environmental_notices_and_user_guide.pdf) information includes statements on limitations,
product information, product recycling and disposal, battery information, flat panel display, refrigeration
and water-cooling systems, external power supplies, and safety data sheets.

Electromagnetic compatibility notices

The following Class A statements apply to IBM products and their features unless designated as
electromagnetic compatibility (EMC) Class B in the feature information.
When attaching a monitor to the equipment, you must use the designated monitor cable and any
interference suppression devices that are supplied with the monitor.
Canada Notice
CAN ICES-3 (A)/NMB-3(A)
European Community and Morocco Notice
This product is in conformity with the protection requirements of Directive 2014/30/EU of the European
Parliament and of the Council on the harmonization of the laws of the Member States relating to
electromagnetic compatibility. IBM cannot accept responsibility for any failure to satisfy the protection
requirements resulting from a non-recommended modification of the product, including the fitting of non-
IBM option cards.
This product may cause interference if used in residential areas. Such use must be avoided unless the
user takes special measures to reduce electromagnetic emissions to prevent interference to the
reception of radio and television broadcasts.
Warning: This equipment is compliant with Class A of CISPR 32. In a residential environment this
equipment may cause radio interference.
Notices 147