Honeywell 400 Series Hardware Manual page 41

Unloading Cards
blue).
1.
Block the cards as soon as practical to keep them from warping or curling.
Removing all cards from the stackers:
1.
2.
Press MANUAL HALT to stOp or prevent card feeding.
Place the right hand behind the deck as the pusher plate is moved out of the way
with the left hand.
Remove the cards, a handful at a time, putting the pusher plate behind the
remaining cards to prevent them from falling over.
If the program is to continue, press OPERATE/RESET.
Return the cards immediately to their storage tray or holder.
Block the cards as soon as practical to prevent warping or curling.
-32-