Error Causes And Elimination - Bosch Rexroth IndraControl VAU 01.1 Series Operating Instructions Manual

Bosch Rexroth AG

Error Causes and Elimination

24V In Input voltage DC 24 V on the UPS of the power supply unit
24V Out Output voltage DC 24 V of the UPS to supply the connected PC
Fig. 12-3: Timing for rotary switch S1 in position "2"
Switch position 8, Shutdown Delay Time = 45 seconds
24V In Input voltage DC 24 V on the UPS of the power supply unit
24V Out Output voltage DC 24 V of the UPS to supply the connected PC
Fig. 12-4: Timing for rotary switch S1 in position "8"
Observe that the timing behavior depends on the switch position "and" on the
"Shutdown Delay Time", which is set in the "UPS-NT Control" software. Via this
software times from 1 second to 45 seconds can be set.
13 Error Causes and Elimination
Device states are indicates on the front panel via LED.
The arrangement of the LED on the front panel is shown in
rating and Error Display" on page
38/53
Switch time
> 120 seconds
Switch position 2; UPS time approx. 120 s
"Shutdown Delay
(is set in the
> 120 seconds
UPS NT Control
software)
Switch time
> 120 seconds
Switch position 8; UPS time approx. 240 s
"Shutdown Delay
(is set in the
> 120 seconds
UPS NT Control
software)
34.
remaining time
Computer
Time"
of the set switch
shutdown
position
remaining time
Computer
Time"
of the set switch
shutdown
position
approx. 160 s
DOK-SUPPL*-VAU*01.1X**-IT02-EN-P
VAU 01.1
approx. 40 s
chapter 12.4 "Ope-