VAU 01.1
8.3 CE Marking
8.3.1 Declaration of Conformity
The electronic products that are described in the present instructions, comply
with the requirements and the target of the following EU directive and with the
following harmonized European standards:
EMC Directive 2004/108/EC
The electronic products described in the present instructions are intended for
use in industrial environments and comply with the following requirements:
Standard
DIN EN 61000-6-4
(VDE 0839-6-4)
DIN EN 61000-6-2
(VDE 0839-6-2)
Tab. 8-3: Standards for electromagnetic compatibility (EMC)
Non-compliance with CE conformity due to modifications to the de-
vice.
The CE marking is only valid for the device in its delivery status. Af-
ter having modified the device, the CE conformity is to be verified.
8.4 UL/CSA Certified
The devices are certified according to
UL508 (Industrial Control Equipment) and
●
C22.2 No. 142-M1987 (CSA)
●
UL file no. E210730
However, there can be combinations or extension stages with limited or missing
certification. Thus, verify the registration according to the UL marking on the de-
vice.
DOK-SUPPL*-VAU*01.1X**-IT02-EN-P
Title
Electromagnetic Compatibility (EMC)
Part: 6-4: Generic standards – emission standard for indus-
trial environments (IEC 61000-6-4:2006)
Electromagnetic Compatibility (EMC)
Part: 6-2: Generic standards – noise immunity for industrial
environments (IEC 61000-6-2:2005)
Bosch Rexroth AG
Standards
Edition
September
2007
March 2006
15/53