Alfa Romeo Spider 2008 Owner's Manual page 222

fig. 14
Changing the windscreen
wiper blades fig. 14
How to remove the blade:
– raise the windscreen wiper arm A;
– turn the blade B by 90° around pin
C, on the final section of the arm;
– remove the blade from the pin C.
How to refit the new blade:
– fit pin C into the hole in the middle
of the blade B;
– refit the arm with the blade on the
windscreen.
SPRAY NOZZLES
If the jet of fluid is missing, firstly check
that there is fluid in the reservoir (see
"Checking fluid levels" in this section).
Then check that the nozzle holes are not
clogged, if necessary use a needle.
Fluid jets shall be directed at about 1/3
height from the window upper edge.
A0G0080m
HEADLIGHT WASHERS
Regularly check that the spray jets are
intact and clean.
The headlight washers are automatical-
ly switched on when the windscreen
washer is operated and the dipped
beams are on.
221