Table Of Contents; General Description; Applications; Operating Conditions - Grundfos CH Series Installation And Operating Instructions Manual
Hide thumbs
Also See for CH Series:
- Installation and operating instructions manual (15 pages) ,
- Installation and operating instructions manual (19 pages)
Table of Contents
Advertisement
CONTENTS
1.
1.1
1.2
1.3
1.4
2.
2.1
2.2
2.3
2.4
3.
3.1
4.
4.1
4.2
5.
5.1
6.
7.
Before beginning installation procedures,
these installation and operating instruc-
tions should be studied carefully. The in-
stallation and operation should also be in
accordance with local regulations and ac-
cepted codes of good practice.
1. General description
1.1 Applications
The CH/CHN range of Grundfos horizontal multi-
stage centrifugal pumps are designed for the pump-
ing of water and other thin, non-aggressive and non-
explosive liquids, not containing solid particles or fi-
bres.
1.2 Operating conditions
1.2.1 Liquid temperature
0°C to +90°C.
1.2.2 Ambient temperature
Up to +55°C.
1.2.3 Maximum operating pressure
0°C to +40°C:
Up to 10 bar.
+41°C to +90°C: Up to 6 bar.
1.2.4 Maximum inlet pressure
The actual inlet pressure plus the pressure when the
pump is operating against a closed valve should al-
ways be lower than the "maximum operating pres-
sure".
6
1.2.5 Minimum inlet pressure
The table below applies to the maximum flow rates
Page
of the pumps and a barometric pressure of
6
760 mmHg.
6
The values stated are the minimum inlet pressures/
6
maximum suction lifts "H" [m head] at the pump suc-
6
tion port. The values are stated at different liquid
6
temperatures. The head loss in the suction pipe
7
should therefore be taken into account.
7
The maximum suction lift may be limited by the ac-
7
tual head.
7
7
Type
8
8
50 Hz
20°C
8
CH 2
*4.1
8
CHN 2
*4.1
8
CH 4
*7.5
8
8
CHN 4
*7.5
9
CH 8
*6.3
9
CH 12
*5.6
60 Hz
CH 2
*3.1
CHN 2
*3.1
CH 4
*6.8
CHN 4
*6.8
CH 8
*6.9
CH 12
*3.5
"H" = minimum inlet pressure during operation.
"H" marked * = maximum suction lift during opera-
tion.
1 m head ≈ 0.1 bar.
1.3 Technical data
1.3.1 Electrical data
See the pump nameplate.
1.3.2 Dimensions
See page 103.
1.4 Sound pressure level
The sound pressure level of the pump is lower than
the limiting values stated in the EC Council Directive
98/37/EC relating to machinery.
H [m head]
40°C
55°C
90°C
*3.6
*2.7
2.8
*3.6
*2.7
2.8
*7.0
*6.1
*0.6
*7.0
*6.1
*0.6
*5.8
*4.9
0.6
*5.1
*4.2
1.3
*2.6
*1.7
3.8
*2.6
*1.7
3.8
*6.3
*5.4
0.1
*6.3
*5.4
0.1
*6.4
*5.5
0.0
*3.0
*2.1
3.4
Hide quick links:
Advertisement
Table of Contents
