Generating A Report - Humanscale MedLink User Manual

6 R e p or t i ng

6.1 GENERATING A REPORT

The reporting function is accessed from the MedLink Configuration menu screen and depending on how the system is configured you
may need administrator credentials in order to access the function.
The Create Report screen allows you to generate a custom report by defining the parameters as described below. Once the required
options are selected, click the Create button to generate the report.
• Filter By
o Filters the report by the selection or entry.
• Date Range
o The date range is limited on some reports due to the possible size of the report.
o If you want a single day, set the start and end dates the same.
• Show only Override actions
o If this option shows, it will limit that report to only show Override actions if selected.
• Highlight Override actions in Red
o If this option shows, it will highlight all Override actions in red on the report.
54
Fig 54