Step 6. Plugging In The Dc Power Cable - Kingston Technology TurboChip 366 User Manual

8

Step 6. Plugging in the DC Power Cable

®
The TurboChip
available power connector coming from the computer's power supply. The
power supply in your computer should have several power connectors available
for adding hard drives, CD-ROMs, and other devices.
Find any available power connector that is not currently in use and attach it to
the 4-Pin male connector from the TurboChip
power connectors are available, the TurboChip
connector, which allows the upgrade to connect into an existing power line.
Simply disconnect any non-primary power cable (e.g., floppy disk). Attach the
male connector to the power source. Then reattach the other end of the cable to
the in-line female connector on the TurboChip
4-Pin Male
Connector
In-Line Female
Connector
Kingston Technology Company
uses a standard 4-Pin power connector, which attaches to any
Figure 7: Attaching the Power Cable
®
(See Figure 7 below). If no
®
also has an in-line female
®
cable.
®
366
TurboChip
Hardware Installation
User's Guide - Rev. A00