Step 5. Inserting The Turbochip - Kingston Technology TurboChip 366 User Manual

Hardware Installation

Step 5. Inserting the TurboChip

To insert the processor upgrade correctly, you need to have the pins on the
®
TurboChip adapter exactly lined up with the corresponding holes on the CPU
socket.
1. While the socket is unlocked or in the open position, align the pins
on the TurboChip
TurboChip
gentle pressure, only if needed, to make sure the processor is
completely inserted, but be careful not to press down on the fan unit.
Instead, grasp the sides of the unit for handling.
2. Lower the sidebar to close the socket back to a locked position.
Refer to Figure 6 below.
®
TurboChip 366 User's Guide - Rev. A00
®
into the holes on the ZIF socket. Place the
®
into the socket without using any force.
Locked
Figure 6: Securing the ZIF Socket
®
Unlocked
Kingston Technology Company
7
Apply