Rules For Selecting The Correct Mode - Gira 2617 Series Operating Instructions Manual

5 rules for selecting the correct mode

Rule 1:
If the door communication system has not been assigned
any switching actuators, the relays assigned to the user
are always switched.
Rule 2:
If the relays should switch together with a switching
actuator (individual/group), mode 3 or 4 must be
selected.
Rule 3:
An individual switching actuator assigned to an individ-
ual user always has a higher priority than a group switch-
ing actuator.
Rule 4:
If a group switching actuator is assigned, it switches in
mode 1 as long as no individual switching actuator is
assigned.
Rule 5:
If a group switching actuator should switch together with
an individual switching actuator, mode 2 or 4 must be
selected.
V
35