Reset To Factory Settings - Delete All Assignments - Gira 2617 Series Operating Instructions Manual

Reset to factory settings – delete all assignments
The fingerprint reader can be reset to the state of deliv-
ery. In this case, all user and administrator assignments
are lost.
Admin
Resetting fingerprint reader:
1. Lay the administrator finger on until a short acknowl-
edgement tone is heard.
3 The LED briefly lights up green, then flashes orange.
2. Lay the administrator finger on until a short acknowl-
edgement tone is heard.
3 The LED briefly lights up green, then flashes orange
twice.
3. Lay the administrator finger on for 5 seconds.
3 During these 5 seconds brief acknowledgement tones
are heard, the LED simultaneously flashes red.
3 2 long acknowledgement tones are heard, the LED
lights up green.
3 The LED flashes green.
The device is now in the state of delivery. All previous
IV
settings have been reset, all user- and administrator fin-
gers have been deleted.
i
Important!
Administrator also deleted
Before reprogramming, an administrator must first be
created (see Page 16).
28
Admin Admin (5 secs.) = State of delivery