Table of Contents
Advertisement
2. Mounting
2.1 Mounting examples and mounting instruction
The reel can be wall-, floor-, or ceiling mounted according to Fig.2.
Mounting bracket (Fig.3, Part# 801951) and Mounting rail (Fig.7,
Part# 704439 – 704442, 715723, 716723) are recommended for easy
installation. (Sold separately)
<Note>
Especially when you are going to install two or more reels, these
optional extras are strongly recommended to arrange the reels
neatly.
If you want to pull the hose to the side, Pivoting wall bracket (Fig.4,
Part# N372407, N372408) is also available.
1) Maximum installation height above floor level is 4m.
2) Select a level surface on which to mount the reel.
3) Make sure to use suitable fixing bolts that can tighten the reel
securely.
4) When mounting the reel directly, use the template on the lid of the
packing box to mark the mounting holes. (Fig.5)
5) When using a mounting bracket or mounting rail for installation,
follow the following procedures and refer to Fig.6.
a. Place an anchor bolt or construct a mounting hole at the
mounting position to meet the mounting rail mounting hole.
b. Clamp the mounting rail at the mounting position with a nut or
bolt.
c. Secure the clamping plate for the mounting bracket to the
mounting rail with four bolts and nuts for each unit.
d. Mount the mounting plate at the hose reel mounting holes with
four bolts.
e. With one clamping plate of the clamping bar removed (the
other slightly loose), insert the upper part of the mounting plate
mounted on the reel into the clamping plate.
f. Attach the clamping bar and tighten both bolts to clamp the
reel.
- In constructing the mounting position, ensure that the
anchor bolts, mounting holes and so forth have sufficient
strength to safely withstand the force that is exerted by
the service hole as it is pulled. An insufficient mounting
strength could result in a fall accident, causing death or
serious physical harm to the user.
WARNING
Fig.6
2
Fig.2
Fig.3
Fig.4
Fig.5
Advertisement
Table of Contents
