Table of Contents
Advertisement
Quick Links
HOSE REEL（HR Series）
Prior to operating this product, be sure to read this operation manual for safety. After reading the manual, please
keep it on hand for future reference.
INSTRUCTION
HR- 3G10
MODELNo. N831488
HR- 3C15
MODELNo. N832888
HR- 3WH15 MODELNo. N831888
HR- 4A15
MODELNo. 854671
HR- 4G15
MODELNo. N831689
HR- 4W15
MODELNo. N830889
WARNING
Doc. No.
HRS 017U-04
Advertisement
Table of Contents
Summary of Contents for YAMADA HR Series
- Page 1 Doc. No. HRS 017U-04 INSTRUCTION HOSE REEL（HR Series） HR- 3G10 MODELNo. N831488 HR- 3C15 MODELNo. N832888 HR- 3WH15 MODELNo. N831888 HR- 4A15 MODELNo. 854671 HR- 4G15 MODELNo. N831689 HR- 4W15 MODELNo. N830889 WARNING Prior to operating this product, be sure to read this operation manual for safety. After reading the manual, please...
-
Page 2: For Safe Operation
- Preface Thank you for purchasing a Yamada product. HR series Hose Reels are spring-driven and ceiling-, wall-, or floor mounted hose reels used to supply air, oil, grease, water, and warm water at various sites such as maintenance factory or gas station. - Page 3 WARNING - Do not pull the supply hose forcibly or bend it tightly. Improper handling may damage the hose or decrease the capacity of the hose pressure. Any secondary accidents such as body injury or facility contamination caused by ignoring the instructions are the user’s responsibility. - To prevent a fall, wear a safety harness while installing the hose reel in a high place.
-
Page 4: Table Of Contents
Table of Contents - Preface - For Safe Operation - Warnings and Cautions - Precautions on Use Names of Parts 1.1 Names of Parts ........................1.2 Contents of Package ......................Mounting 2.1 Mounting examples and mounting instruction ..............2.2 Hose Outlet (Arm angle adjustment) ..................2.3 Connection to the pipework system .................. -
Page 5: Names Of Parts
1. Names of Parts 1.1 Names of Parts Fig.1 Names of Parts 1.2 Contents of Package ■Contents of a package As soon as you open the box, inspect the product for damage and check that all the accessories are included. The mounting template is printed on the lid of the box. -
Page 6: Mounting
2. Mounting 2.1 Mounting examples and mounting instruction The reel can be wall-, floor-, or ceiling mounted according to Fig.2. Mounting bracket (Fig.3, Part# 801951) and Mounting rail (Fig.7, Part# 704439 – 704442, 715723, 716723) are recommended for easy installation. (Sold separately) <Note>... -
Page 7: Hose Outlet (Arm Angle Adjustment)
Fig.7 Mounting rail 2.2 Hose Outlet (Arm angle adjustment) The hose outlet can be fitted in your desired position by rotating the arm 36 degrees at a time. (Fig.8) Choose the position where the hose is bent as little as possible. 1) Remove the lock head from one side using the provided tool (Torx Fig.8 driver T25). -
Page 8: Connection To The Pipework System
2.3 Connection to the pipework system (Fig.13) Install a stop valve on the pipe system before connecting the hose. 1) Attach the ring on the arm. (Fig.13) 2) Pass the intake hose through the ring and connect it to the pipe work. -
Page 9: Installation Of Dispensing Tool
3.1 Installation of Dispensing Tool Attach the provided hose fitting to the hose end. Then, attach a dispensing tool such as a gun to the hose fitting. (Refer to Table 2) ■Table 2 Supply Hose Fitting (accessory) Product No. Description Model Application Hose Size Outlet... -
Page 10: Maintenance And Inspection
4. Maintenance and Inspection 4.1 Troubleshooting Problem Possible Cause Remedy Reel cannot be locked. Hose-stop or spring is damaged. Contact for service. Supply hose doesn’t recoil Pull out supply hose completely and even after ratchet is Hose is wound unevenly and stuck somewhere. rewind it. -
Page 11: Parts Disassembly Drawing And Parts List
CAUTION - Wear safety gloves when adjusting spring tension. There is a risk of injury. - Failure to use the right tool for the square hole in the spring hub may result in an unexpected injury. - Once the two screws are removed, spring tension is applied to the square wrench. Hold the wrench tightly during adjustment. -
Page 12: Specifications
6. Specifications ■Specifications Product No. N831488 N832888 N831888 Description Hose Reel 888 Model HR-3G10 HR-3C15 HR-3WH15 Application Grease Warm Water Weight [kg] 12.1 16.9 13.8 Hose size 1/2 × 1m 3/8 × 1m 3/8 × 1m Outlet G1/2 G3/8... - Page 13 ■Dimensions N831488, N831888 [ ]: for 854670 N831689，[ ]: for N830889, 854671...
-
Page 14: Limited Warranty
7. Limited Warranty ● If an abnormality occurs during normal operation in accordance with the operating instructions and other operating cautions within the warranty period (12 months after date of purchase) that can be attributed to a manufacturing defect, the defective parts of this product will be serviced or the product will be replaced free of charge. However, this warranty will not cover compensation for incidental damage or any malfunction listed below. - Page 15 MEMO.
- Page 16 Manufactured by YAMADA CORPORATION INTERNATIONAL DEPARTMENT 1-1-3 Minami Magome, Ohta-ku, Tokyo 143-8504, Japan PHONE : +81-(0)3-3777-0241 : +81-(0)3-3777-0584 201306 HRS017U...