Sample SYSTEM.TXT File with Eight Port Data Advantage
In the following SYSTEM.TXT two WNI boards are configured. This configuration supports eight ports. Note
that under the heading [board 2] and [board 3] only the "type" command is specified. Data Advantage will
default the application executable file to "01.02/loads/WNI.SX" and the ports 0 and 1 on each WNI to be input
ports and the ports 2 and 3 on each board to be Output ports, since there are no "load" and "port_dir" command
specified.
###############################################
# SYSTEM.TXT configuration file.
###############################################
[board 1]
type cap
load 01.02/loads/DACAP.SX
[board 2]
type wni
[board 3]
type wni
[ip]
cap_ext_address 1.0.15.14
[edcas_network]
ip_network_id 128.1.0.0
[device_config_table]
rdt
64 - 16382 128.1.0.64
port 0
port 1
port 2
port 3
14
FALSE
1.0.15.12
1.0.15.12
1.0.15.13
1.0.15.13
LBI-39190