Adapting Transducers - ADInstruments Bridge Amp Owner's Manual

Adapting
3
Transducers
This chapter describes the modifications that may be required to
connect third-party transducers to the Bridge Amp. Transducers
supplied by ADInstruments should connect directly without
modification, so if using those you need not read this chapter.
If you are using powered third-party transducers with your Bridge
Amp you may need to adapt them using the information provided
here.
NOTE: Please ensure that any modifications made to transducers are
carried out by experienced technical staff, as incorrect wiring may
damage the transducer or Bridge Amp. If you are unsure, please
contact your nearest ADInstruments representative for further
assistance.
35
Chapter 3

Adapting Transducers

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com