Engine Oil Pressure; Gauge - GMC CHEVROLET Silverado 6500HD 2019 Owner's Manual

Table of Contents

Advertisement

Here are four things that some
owners ask about. None of these
show a problem with the fuel gauge:
At the service station, the fuel
pump shuts off before the gauge
reads full.
It takes a little more or less fuel
to fill up than the gauge
indicated. For example, the
gauge may have indicated the
tank was half full, but it actually
took a little more or less than
half the tank's capacity to fill
the tank.
The gauge moves a little while
turning a corner or speeding up.
The gauge takes a few seconds
to stabilize after the ignition is
turned on, and goes back to
empty when the ignition is
turned off.

Engine Oil Pressure

Gauge

The engine oil pressure gauge
shows the engine oil pressure
in psi (pounds per square inch)
when the engine is running.
Oil pressure can vary with engine
speed, outside temperature, coolant
temperature, and oil viscosity.
On some models, the oil pump will
vary engine oil pressure according
to engine needs. Oil pressure may
change quickly as the engine speed
or load varies. This is normal. If the
oil pressure warning light or Driver
Instruments and Controls
Information Center (DIC) message
indicates oil pressure outside the
normal operating range, check the
vehicle's oil as soon as possible.
See Engine Oil 0 295.
Caution
Lack of proper engine oil
maintenance can damage the
engine. Driving with the engine oil
low can also damage the engine.
The repairs would not be covered
by the vehicle warranty. Check
the oil level as soon as possible.
Add oil if required, but if the oil
level is within the operating range
and the oil pressure is still low,
have the vehicle serviced. Always
follow the maintenance schedule
for changing engine oil.
109

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents