Turn On The Power - Prestel VCS-G2PRO User Manual

Split HD Video Conference Terminal
 Input microphone sound: Use the CANNON cable to connect the matching microphone to
the MIC IN interface of the terminal.
 Input the player sound: Use the Lotus head audio cable to connect the computer or phone
audio to the AUDIO IN interface of the terminal.
 Output sound: Connect the HDMI OUT1 of the terminal to the HDMI input of the display
device using the HDMI cable, or connect the audio (speaker) to the AUDIO OUT interface
of the terminal using the Lotus head audio cable.
 Output the main video image: Connect the HDMI OUT1 interface of the terminal to the
HDMI input interface of the display device using the HDMI cable.
 Output the second video image: Connect the HDMI OUT2 interface of the terminal to the
HDMI input interface of the display device using the HDMI cable.
 Connect to the network: Connect the NET interface of the terminal with a network cable to
connect the terminal to the network.
 Connect the power: Connect to the power outlet using 100~240V AC power cord.

3.2 Turn On the Power

After connecting all the devices used with the conference terminal, turn on the power.
When the terminal power is on, prevent the power cord from disconnecting from the

terminal and causing the terminal to lose power.
 Please turn off the terminal, then turn off the external power supply, and finally pull out the
power cord. Please check that the power cord is properly and reliably connected to the
device as described below.
 Please make sure that the AC power supply voltage ranges from 100V to 240V and the
frequency is 50Hz or 60Hz.
 The sequence definition of the live (L), neutral (N) and protective ground (PE) and the
corresponding voltage difference must comply with international standards, and the
protective ground is reliably grounded.
With HDMI OUT1 as the output interface, connect the cable as shown above and press the
power button (green light is on) and boot to the main menu of the display screen.
After power is turned on, the indicators of the terminal are as shown in the following table.
6
User Guide