Sip Account Settings (Optional) - Prestel VCS-G2PRO User Manual

Split HD Video Conference Terminal
Parameter
Register GK
Gatekeeper
Site Name
Site Number
Site Password
Save

6.3 SIP Account Settings (optional)

Configure the SIP parameters, set the SIP address of the terminal, and communicate with the
remote server through the registration number.
Step 1 Enter the GUI main interface, select "Settings > Account > SIP Account".
Step 2 Configure SIP parameters. The parameters are described in the following table.
Step 3 Select "Save", save configuration information.
Step 4 End.
Description
Enable or disable register GK function, the options are:
 Enable: The terminal registers with the GK server. After the terminal
is successfully registered to the GK server, you can call other
terminals through the remote meeting number.
 Disable: The terminal does not register with the GK server. When
calling with the H.323 protocol, only other terminals can be called by
IP address.
Set the IP address or domain name of the GK server.
When set to domain name, you need to enable the DNS server and set
the correct mapping on the DNS server.
The name or alias of the terminal registered on the GK.
After the terminal registers with the GK server, the GK server identifies
the terminal with the name.
Site number corresponding to the terminal.
After the terminal registers with the GK server, other terminals can use
the number to call the terminal.
The password registered by the terminal to the GK server for the legality
of the GK server authentication terminal.
Select "Save", save configuration information.
11
User Guide