Split HD Video Conference Terminal
6
Basic Settings
6.1 Network Settings
Step 1 Enter the GUI main interface, select "Settings > Network > IPv4".
Step 2 Set network parameters such as IP address, gateway and subnet mask etc.
Step 3 Select "Save", save configuration information.
Step 4 End.
Parameter
Work Mode
Connection
Type
IP address
Subnet mask
Gateway
DNS address
Save
Description
Configure the network working mode, the options are:
Auto
10M Full Duplex
10M Half Duplex
100M Full Duplex
100M Half Duplex
1000M Full Duplex
1000M Half Duplex
DHCP: The terminal automatically obtains an IP address through a
DHCP server.
Static IP: The IP address of the terminal is assigned by the network
administrator. You need to set the IP address, netmask, gateway,
and DNS address.
Configure the IP address of the terminal.
Configure the subnet mask of the terminal.
Configure the default gateway address of the terminal.
Configure the IP address of the DNS server.
Select "Save", save configuration information.
9
User Guide