Table of Contents
Advertisement
BarDIMM Pro & BarDIMM Box – Intelligent Barcode Printing System
27 - Warrantee information
Hardware warrantee information
Jetmobile warrants all BarDIMM Pro and BarDIMM Box components to be free from
defects, and will—at our option—repair or replace the product should it fail within one
year from the first date of shipment. This warranty is limited to defects in workmanship or
materials, and does not cover software, firmware, customer damage, abuse or unauthorized
modification. If this product fails or does not perform as warranted, your sole recourse
shall be repair or replacement as described above. Under no condition shall Jetmobile be
liable for any damages incurred by the use of this product. These damages include, but are
not limited to, the following: lost profits, lost savings and incidental or consequential
damages arising from the use of or inability to use this product. Jetmobile specifically
disclaims all other warranties, expressed or implied, and the installation or use of this
product shall be deemed an acceptance of these terms by the user.
FCC rules – radio and TV interference
BarDIMM Box generates and uses radio frequency energy, and if not installed and used
properly—that is, in strict accordance with the manufacturer's instructions—may cause
interference to radio and television reception. BarDIMM Box has been tested and found to
comply with the limits for a Class A computing device in accordance with the
specifications in Subpart J of Part 15 of FCC rules, which are designed to provide
reasonable protection from such interference in a commercial installation. However, there
is no guarantee that interference will not occur in a particular installation. If BarDIMM
Box does cause interference to radio or television reception, which can be determined by
disconnecting the Adapter from all its plugs, the user is encouraged to try to correct the
interference by one or more of the following measures: moving the computing equipment
away from the receiver, re-orienting the receiving antenna and/or plugging the
receiving equipment into a different AC outlet (such that the computing equipment and
receiver are on different branches).
Service
All warranty and out-of-warranty repairs must be returned freight prepaid and insured to
your Jetmobile reseller. All returns must have a Jetmobile Return Materials Authorization
number on the outside of the shipping container. This number may be obtained by your
reseller if this is found necessary by Jetmobile, from the Jetmobile Technical Support at
support@jetmobile.com.
Note: Packages received without an RMA number will not be accepted.
Jetmobile distributors are available to answer any questions that might arise concerning
the installation or use of your BarDIMM Pro or BarDIMM Box.
Page 53
©2004-2006 Jetmobile
www.jetmobile.com
Hide quick links:
Advertisement
Table of Contents
