4- Testing The Bardimm - Jetmobile BarDIMM Pro Installation And Programmer's Manual

Intelligent barcodes printing system for ms-windows, unix, as-400, mainframes and erps
Table of Contents

Advertisement

This screen allows to reset the BarDIMM Box to the factory settings, the way it was when
you received it. The password will be reset and will need to be redefined at the first login,
and the configuration is deleted.
This screen restarts the BarDIMM Box. The reboot rakes approximately 2 minutes.
This option closes the web session with the BarDIMM Box

4- Testing the BarDIMM

4-1 – Testing the BarDIMM module for hp printers
This sub-chapter is only applicable to BarDIMM Pro on memory boards. For the
BarDIMM Box, please refer to the next sub-chapter.
There are two different features built in the BarDIMM: fonts and firmware. They work
totally independently, so you may have to test them both.
- Fonts: The BarDIMM contains the Barcode&More fonts. From the front panel of the
printer (if there is any), generate a PCL Font List. If OCR-B or [23590] font names appear
in the font list, the BarDIMM fonts are recognized by the printer. This indicates the
hardware DIMM is recognized by the printer, but does not mean firmware is recognized.
- Firmware: The two following operations must be performed.
From the front panel of the printer, generate a Printer Auto Test. A page is
printed, on which the list of " Personalities " appears. The BarDIMM application
should be listed on the left part of the page
BarDIMM test files are available on the drivers section of the Jetmobile web site
http://www.jetmobile.com
active. If a MEMORY OVERFLOW error message appears on the front panel (or
if error LEDs blink on some printers), or if text replaces the barcodes, the
BarDIMM is not recognized and the printer can get out of memory trying to map
barcode parameters to the default text font.
• If both tests are successful, the BarDIMM is recognized by the HP LaserJet /
Business Ink Jet and operates correctly.
If those two tests fail, verify if the BarDIMM you have purchased is compatible
with your printer (a label on the board should indicate the compatibility). Please
then contact your distributor (please read below)
©2004-2006 Jetmobile
BarDIMM Pro & BarDIMM Box – Intelligent Barcode Printing System
. Send them to the printer to verify BarDIMM is
www.jetmobile.com
Page 13

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bardimm box

Table of Contents