Table of Contents
Advertisement
UD820_Eng_OM-final.qxd
Receiving Calls
1) When the phone rings or vibrate (if the Vibrate
Mode is enabled), press
• When you press
received, the phone stops ringing or vibrating
depending on the mode it is in. Press
to disconnect.
2) To end an answered call press
Signal Strength
If you're inside a building, being near a window may
give you better reception. You can see the strength of
your signal by the signal indicator (
phone's display screen.
7/7/06
1:06 PM
Page 15
.
once, when a call is
twice
.
) on your
About the antenna
Your phone has a built-in
antenna. As with any other
radio transmitting device, do
not touch the antenna
unnecessarily when the
phone is switched on.
Contact with the antenna
affects call quality and may cause the phone to
operate at a higher power level than needed.
Not touching the antenna during a call optimizes the
antenna performance and the talk-time of your phone.
Normal position: Hold the phone as you would any
other telephone.
15
820
Advertisement
Table of Contents
