Table of Contents
Advertisement
UD820_Eng_OM-final.qxd
Charge the battery fully before the initial use of the
phone.
The phone comes with a rechargeable battery. Keep
the battery charged while not in use in order to
maximize talk and standby time when using the phone.
Installing and Removing the Battery
G
To install, insert the battery into the opening on the
back of the phone, and insert the bottom of battery
into groove at the bottom of the handset. Gently
press down the cover until the latch snaps into place.
G
To remove, push the back cover down. Push the
tab with one hand and lift the top of the battery to
separate.
Groove
12
820
7/7/06
1:06 PM
Using the Battery and Charger
Slot
Page 12
Charging the Battery
To use the AC adapter charger provided with your
phone:
1. Plug the AC adapter into the electrical outlet.
2. Insert the round end of the adapter into the AC
adapter jack on the right side of the phone which is
located in the left on the mini SD Card slot. (Make
sure the battery is installed.)
As the phone charges, the battery icon continually
displays a progression from empty (
(
).
It takes about three hours to fully recharge a
completely rundown battery. When fully charged,
battery icon indicates charging by twinkling.
) to full
Advertisement
Table of Contents
