Table of Contents
Advertisement
Available languages
Available languages
8.2
Remove
object
Global Para
Reset Para
Emiss:
0.93
Distan:
2 m
Offset:
0.0 °C
To learn about
correcting climatic
conditions, please
see chapter 8.5.
8.4
Reset general parameters
Global Para
Reset Para
Emiss:
0.93
Distan:
2 m
Offset:
0.0 °C
!
Before adjusting complex settings, use this function to reset all parameters to the default factory
settings in order to quickly and safely achieve the desired settings from here.
8.5
Measurement-speci c settings
The following measurement-speci c settings must be adjusted to the climatic conditions before starting
measurements. Starting from 10 m distances, the atmospheric in uences of the air must always be taken
into account. This is required for the internal sensors to be able to accurately determine the infrared
emissions of the measured object. Please also consider chapters 8.1 and 8.2 in this regard.
Global Para
Measure Setting
Alarm
ThermoCamera-Vision
8.3
Offset temperature
Global Para
Reset Para
Emiss:
0.93
Distan:
2 m
Offset:
0.0 °C
Global Para
Reset all parameters to default?
Reset Para
Yes
No
Emiss:
0.93
Distan:
2 m
Offset:
0.0 °C
Measure Setting
Range:
-20~150°C
Env:
21.0 °C
Humidity:
60 %
Ref. Temp:
21.1 °C
The offset temperature allows
you to balance temperature
differences for the entire
thermogram (see also
chapter 10).
Factory settings
Emissivity coef cient
Distance
Ambient temperature
Rel. humidity
Re ection temperature
Offset temperature
Pre-selection of
measurement range:
-20 °C ... 120 °C (ideal for
interior and exterior)
0 °C ... 400 °C (ideal for
industrial applications)
Ambient temperature
Rel. humidity
Re ection temperature
0,95
2 m
25 °C
60 %
25 °C
0 °C
GB
35
Advertisement
Table of Contents
