1. Manuals
  2. Brands
  3. Vezco Manuals
  4. Security Camera
  5. VZ-IP-B4530
  6. Quick start manual

Vezco VZ-IP-B4530 Quick Start Manual

Network bullet camera
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
NETWORK BULLET CAMERA
Quick Start Guide

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VZ-IP-B4530 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Vezco VZ-IP-B4530

Summary of Contents for Vezco VZ-IP-B4530

  • Page 1 NETWORK BULLET CAMERA Quick Start Guide...
  • Page 2 Network Bullet Camera·Quick Start Guide Quick Start Guide About this Manual This Manual is applicable to Network Bullet Camera. The Manual includes instructions for using and managing the product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to firmware updates or other reasons.
  • Page 3 Network Bullet Camera·Quick Start Guide FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
  • Page 4 Network Bullet Camera·Quick Start Guide 2. This device must accept any interference received, including interference that may cause undesired operation. EU Conformity Statement This product and - if applicable - the supplied accessories too are marked with "CE" and comply therefore with the applicable harmonized European standards listed under the EMC Directive 2014/30/EU, the RoHS Directive 2011/65/EU.
  • Page 5 Network Bullet Camera·Quick Start Guide Safety Instruction These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss. The precaution measure is divided into “Warnings” and “Cautions” Warnings: Serious injury or death may occur if any of the warnings are neglected.
  • Page 6 Network Bullet Camera·Quick Start Guide to the IEC60950-1 standard. Please refer to technical specifications for detailed information. ● Do not connect several devices to one power adapter as adapter overload may cause over-heating or a fire hazard. ● Please make sure that the plug is firmly connected to the power socket.
  • Page 7 Network Bullet Camera·Quick Start Guide ● Do not place the camera in extremely hot, cold (the operating temperature shall be-30° C to +60° C, or -40° C to +60° C if the camera model has an “H” in its suffix), dusty or damp locations, and do not expose it to high electromagnetic radiation.

  • Page 8: Table Of Contents

    Network Bullet Camera·Quick Start Guide Table of Contents 1 Appearance Description ............... 8 2 Installation ................. 11 2.1 Ceiling Mounting ............11 2.2 Wall Mounting with Junction Box ........14 2.3 Installation of Water-proof Jacket ........17 3 Setting the Network Camera over the LAN ......... 19 3.1 Wiring ................

  • Page 9: Appearance Description

    Network Bullet Camera·Quick Start Guide 1 Appearance Description This series of cameras have three appearances shown as the figures below. Type I: Figure 1-1 Type I Bullet Camera Overview Type II： Figure 1-2 Type II Bullet Camera (PoE) Overview...
  • Page 10 Network Bullet Camera·Quick Start Guide Note: For cameras support power over Ethernet (PoE), the power is passed along with data on Ethernet cabling. And a switch supports PoE function is required. Description Description Mounting Base Back Cover Front Cover IR LED Grounding Power Cord &...
  • Page 11 Network Bullet Camera·Quick Start Guide Description Description Lens Front Cover Back Cover Mounting Base Power Cord Network Cable...

  • Page 12: Installation

    Network Bullet Camera·Quick Start Guide 2 Installation Before you start: ● Make sure the device in the package is in good condition and all the assembly parts are included. ● The standard power supply is 12V DC, please make sure your power supply matches with your camera.
  • Page 13 Network Bullet Camera·Quick Start Guide And you can take steps of ceiling mounting as a reference for wall mounting. Steps: 1. Paste the drill template (supplied) to the desired mounting position on the ceiling. 2. Drill the screw holes in the ceiling according to the supplied drill template.
  • Page 14 Network Bullet Camera·Quick Start Guide Figure 2-2 Fix the Camera on the Ceiling Note: In the supplied screw package, both self-tapping screws, and  expansion bolts are contained. If the ceiling is cement, expansion bolts are required to fix the ...

  • Page 15: Wall Mounting With Junction Box

    Network Bullet Camera·Quick Start Guide 5) Loosen the No.3 adjusting screw to adjust the pan position [0° to 360°]. 6) Tighten the No.3 adjusting screw. P:0° to 360° R:0° to 360° T:-90°to 90° Figure 2-3 3-aix Adjustment 7. (Optional) Install the water-proof jacket. Refer to 2.3 Installation of Water-proof Jacket for details.
  • Page 16 Network Bullet Camera·Quick Start Guide 2. Drill the screw holes and the cable hole (optional) in the wall according to the drill template. Note: Drill the cable hole, if adopting ceiling outlet to route the cable. Screw Hole Cable Hole Figure 2-4 The Drill Template 3.
  • Page 17 Network Bullet Camera·Quick Start Guide 5. Secure the junction box’s body with three supplied screws on the wall. Water Proof Cover Cable Gland Figure 2-6 Fix the Junction Box on the Wall 6. Route the cables through the cable hole. Here we take bottom cable hole as the example to describe the installation.

  • Page 18: Installation Of Water-Proof Jacket

    Network Bullet Camera·Quick Start Guide Figure 2-7 Combine Junction Box’s Cover with its Body 8. Repeat steps 5 to 7 of 2.1 Ceiling Mounting to complete the installation. Installation of Water-proof Jacket Purpose: It is recommended to adopt the water-proof jacket (supplied) for the network interface when the camera is installed outdoor.
  • Page 19 Network Bullet Camera·Quick Start Guide 4. Wire the plug and network cables up. 5. Fix the O-ring to the network interface of the camera, and then connect the network cables. 6. Wrap the network interface with the main body of the water-proof jacket, and then rotate the fix nut clockwise to assemble it to the main body of the water-proof jacket.

  • Page 20: Setting The Network Camera Over The Lan

    Network Bullet Camera·Quick Start Guide 3 Setting the Network Camera over the Note: You shall acknowledge that the use of the product with Internet access might be under network security risks. For avoidance of any network attacks and information leakage, please strengthen your own protection.

  • Page 21: Activating The Camera

    Network Bullet Camera·Quick Start Guide 3.2 Activating the Camera You are required to activate the camera first by setting a strong password for it before you can use the camera. Activation via Web Browser, Activation via SADP, and Activation via Client Software are all supported.

  • Page 22: Activation Via Sadp Software

    Network Bullet Camera·Quick Start Guide Activation Interface(Web) 3. Create a password and input the password into the password field. STRONG PASSWORD RECOMMENDED– We highly recommend you create a strong password of your own choosing (using a minimum of 8 characters, including upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product.
  • Page 23 Network Bullet Camera·Quick Start Guide Get the SADP software from the supplied disk or the official website, and install the SADP according to the prompts. Follow the steps to activate the camera, please refer to the User Manual of Network Camera for other two activation methods.

  • Page 24: Modifying The Ip Address

    Network Bullet Camera·Quick Start Guide STRONG PASSWORD RECOMMENDED– We highly recommend you create a strong password of your own choosing (using a minimum of 8 characters, including upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product.
  • Page 25 Network Bullet Camera·Quick Start Guide Steps: 1. Run the SADP software. 2. Select an activate device. 3. Change the device IP address to the same subnet with your computer by either modifying the IP address manually or checking the checkbox of Enable DHCP. Modify the IP Address...
  • Page 26 Network Bullet Camera·Quick Start Guide Note: You can enable the Guarding Vision service for the device during activation. Refer to Chapter 5.1 for detailed information. 4. Input the admin password and click Modify to activate your IP address modification. The batch IP address modification is supported by the SADP. Please refer to the User Manual of SADP for details.

  • Page 27: Accessing Via Web Browser

    Network Bullet Camera·Quick Start Guide 4 Accessing via Web Browser System Requirement: Operating System: Microsoft Windows XP SP1 and above version CPU: 2.0 GHz or higher RAM: 1G or higher Display: 1024×768 resolution or higher Web Browser: Internet Explorer 8.0 and above version, Apple Safari 5.0.2 and above version, Mozilla Firefox 5.0 and above version and Google Chrome 18 and above version Steps:...
  • Page 28 Network Bullet Camera·Quick Start Guide 4. Click Login. Login Interface 5. Install the plug-in before viewing the live video and managing the camera. Please follow the installation prompts to install the plug-in. Note: You may have to close the web browser to finish the installation of the plug-in.

  • Page 29: Operating Via Guarding Vision App

    Network Bullet Camera·Quick Start Guide 5 Operating via Guarding Vision App Purpose: Guarding Vision is an application for mobile devices. With the App, you can view live image of the camera, receive alarm notification and so on. Note: Guarding Vision service is not supported by certain camera models. 5.1 Enable Guarding Vision Service on Camera Purpose: Guarding Vision service should be enabled on your camera before...

  • Page 30: Enable Guarding Vision Service Via Web Browser

    Network Bullet Camera·Quick Start Guide Service” “Privacy Policy” Verification Code Setting (SADP) Note: The verification code is required when you add the camera to Guarding Vision App. 3. Click and read "Terms of Service" and "Privacy Policy". 4. Confirm the settings. Enable Guarding Vision Service via Web Browser Before you start: You need to activate the camera before enabling the service.
  • Page 31 Network Bullet Camera·Quick Start Guide Steps: 1. Access the camera through web browser. Refer to Chapter 4. 2. Enter platform access configuration interface: Configuration > Network > Advanced Settings > Platform Access Guarding Vision dev.guardingvision.com Platform Access Configuration (Web) 3. Select Platform Access Mode as Guarding Vision. 4.

  • Page 32: Guarding Vision Setup

    Network Bullet Camera·Quick Start Guide 5.2 Guarding Vision Setup Steps: 1. Download and install the Guarding Vision App by searching “Guarding Vision” in App Store or Google Play 2. Launch the app and register for a Guarding Vision user account. 3.
  • Page 33 Network Bullet Camera·Quick Start Guide You can find the QR code on the camera or on the cover of the Quick Start Guide of the camera in the package. Figure 5-4 Scan QR Code Note: If the QR code is missing or too blur to be recognized, you can also add the camera by tapping the icon and inputting the camera's serial number.

  • Page 34: Initializing The Memory Card

    Network Bullet Camera·Quick Start Guide 5.4 Initializing the Memory Card Steps: Check the memory card status by tapping on the Storage Status in the Device Settings interface. If the memory card status displays as Uninitialized, tap to initialize it. The status will then change to Normal. You can then start recording any event triggered video in the camera such as motion detection.

Table of Contents