Killgerm Motion Sensor Camera Instruction Manual page 19

(Image 9)
• Once you have completed inputting the correct network date. Click the "SAVE"
button and save as "Parameter.dat" file to the MICRO SD Card.
Note: Only have 1 "Parameter.dat" saved onto the MICRO SD Card at any
one time or the camera won't work.
Unplug USB cable from the camera, and then turn the camera to the "OFF"
•
mode, and then back to the "TEST" mode. Once in the "TEST" screen, double
check that the Signal bar and network sim is displaying on screen (wait a minute
for this to display).
Once the Sim is displaying in the "TEST" mode, simply switch to the "ON"
•
position and use as you see fit.
MOTION SENSOR CAMERA INSTRUCTION MANUAL
Mobile number
which will
receive the
images
19