Film Advancing - Zero Image Zero 135 Instruction Manual

1. Turn the Film Advance Knob (G) counter-clockwise to
advance the film. Using the mark on top of the knob and the
markings on the top cover as a reference, advance the film by
at least 5 complete revolutions. Now make sure the dots of the
knob aligns with the far right marking (E) of the Top Cover (B).
2. After each exposure, advance the film by turning the Film
Advance Knob (D) one-and-a-quarter revolutions for the first
five shots. After those first five shots, the dot of the Film
Advance Knob (D) will align with the uppermost marking on
the top cover.
For the remaining shots, turn the Film Advance Knob (D) by one
revolution until you find it very difficult to advance the film. This
will indicate that the whole roll of film has been exposed.
Note: 1. The mechanism of the Film Advance Knob (D) will not
allow you to turn the knob clockwise, which prevents the
film from curling back. Attempting to turn the knob in a
clockwise direction may damage the camera.
2. Please be advised that the last frame will be wasted due to
the method of film advance employed in this camera.

FILM ADVANCING

4