Maintenance - Zero Image Zero 135 Instruction Manual

1. Avoid getting the camera wet.
2. Do not allow the camera to be exposed to strong sunlight for a
long period of time.
3. Do not press or punch the pinhole or zone plate with any object.
4. Never clean the camera with an alcohol-based cleaning agent.
5. Clean the camera with a cotton cloth, and a polishing oil like
lemon oil, or orange oil for woodworking. Beeswax is
preferable.
6. If the shutter or the exposure scale is too tight or too loose,
adjust the screw that holds it with a screw driver.
7. Clean the pinhole/zone plate with an air blower tenderly. Keep
the blower at least one inch away from the pinhole or the zone
plate and blow away the dust tenderly. Too much air pressure
may damage the pinhole and the zone plate.
8. Never over-tighten the knobs or any screw of the camera. It will
cause damage to the camera.
9. Do not store the camera near a heat source or in a cabinet with
humidity control, as the camera may dry up or crack.

MAINTENANCE

9