Loading The Film - Zero Image Zero 135 Instruction Manual

1. Insert the fresh film and the pick-up film canister into the
camera with the fresh roll of film on the right hand side of the
camera.
Take-up film canister
2. Press the fresh film and the pick-up film canister into the
pocket of the camera until they are sited properly and firmly.
3. Replace the Top Cover (B) and turn the Film Advance Knob
counter-clockwise (D) several revolutions until the masking
tape has disappeared entirely within the take-up canister.
4. Replace the Back Cover (H) of the camera
5. Replace the Top Cover (B) and lock it to the camera by
turning the Top Cover Lock (C) clockwise. Don't over-tighten
it or you may damage your camera.

LOADING THE FILM

Fresh film
3